- 1292 HWY 175 Hubertus, WI 53033
- sales@mjgunshop.com
- (262) 628-4200
Our Services
- Home
- Shop
Services We Offer
We’re always looking to improve our shop, so if you have ideas you’d like to share with us, please fill out our form here!
Our Pricing
General
| Inspect firearm & prepare written quote (Diagnostic Fee) | $45 |
| Professional boresighting | $15 |
| Professional scope mounting & boresighting | $35 |
| Ring Lapping | $45 |
| Destroy Firearm (includes: Shipping to a service center, ATF paperwork, disassembly, destruction and disposal) | $90 |
| FFL Transfer Fee | $25 |
| NFA Item Transfer Fee | $75 |
| Complete Gunsmith Cleaning (Includes complete disassembly, cleaning, reassemble) | $70 |
| Minimum Charge | $35 |
| Remove Live Round | $50 |
| Repair (Hourly) | $80 |
| Head Space & Safety Check | $45 |
| Express Rush Fee | $50 |
| Test Fire | $15 Minimum |
(The following prices include: Stripping or standard finishes, sanding, removal of small dents and nicks, taping off the checkering, finishing, and resealing the checkering.)
| Hand rubbed oil finish leaving the grain of the wood open | $250 |
| Hand rubbed oil finish, includes completely filling the grain | $340 |
| High gloss grain open | $350 |
| High gloss Weatherby style finish with grain completely filled | $450 |
| Oil-soaked stock (Add-on Service) | $80 |
| Large dent removal (Add-on Service) | $80/hr |
| Crack repair (Add-on Service) | $80/hr |
| Stripping epoxy finish (like on the Weatherby MkV and some Browning models) (Add-on Service) | $70 |
| Staining if needed (Add-on Service) | $20 |
| New Barrel Chamber Engrave (Usually included if we chamber the barrel for you) | $60 |
| Gun Trust Engrave | $60/Item |
| Custom Design Engrave | $90 Starting |
| Customer Laser Stippling (Glocks Only) | ~$350 |
| *Note: An hourly art fee will be applied to custom design engraving for complex designs that aren't already vectorized. (Minimuim 1 hour) | $40/Hour |
| 10 Guns or Less | $75 |
| Greater than 10 Guns | $7.50/Gun |
Handgun
| Recrown most revolvers (barrel must be removed from frame) | $145 |
| Thread Barrel | $150 |
| Drill & Tap for scope mounts (per hole) | $25 |
| Revolver action job/clean & smooth action (spring kits and parts cost additional) | $150 |
| Remove or modify hammer spur (refinish parts extra) | $90 |
| Drill & Tap frame for scope mounts (per hole) | $25 |
| Semi-auto pistol action job: Clean & smooth action (parts cost additional) | $100 |
| Polish feed ramp | $50 |
| Fit custom trigger (trigger parts cost extra) | $80 |
| Install sights of any kind on most pistols, when milling is not required (sights additional) | $45 |
| Mill slide for front dovetail sight | $75 |
| Mill slide cocking serrations front OR rear (refinishing additional) | $100 |
| Mill slide cocking serrations front & rear (refinishing additional) | $150 |
| Stippling or texturing service available on most polymer frames | Quote |
| Zero Handgun | $60 + Ammo |
| Correct Revolver Timing | $125 + Parts |
| Red Dot Cut (Adapter plates additional) | $150 |
| Slide Finishing: Cerakote (Just the cut) | $35 |
| Slide Finishing: Cerakote single color, entire slide | $75 |
| Sight Options: Suppressor height sights available | Quote |
| Fit barrel: non-ramped barrel | $150 |
| Fit barrel: ramped barrel | Quote |
| Fit & install barrel bushing (bushing additional) | $90 |
| Checker front strap of 1911 style frame (available in 20, 25, or 35 lines/inch) | $300 |
| Polish barrel and feed ramp | Starting at $90 |
| Fit custom trigger (trigger parts cost extra) | $70 |
| Modify frame for beavertail grip safety (safety parts and refinishing additional) | $180 |
| Fit & install custom extended or ambidextrous safety lever (safety lever parts additional) | $45 |
| Extreme Race Kit (Completely disassemble, clean, check, and test fire. Install Wilff custom recoil spring, firing pin, main and sear springs, tune the extractor, polish breech face, feed ramp, and disconnector rail. Includes parts) | $250 |
| The Defense (Completely disassemble, clean, check, and test fire. Trigger job (4lbs), tune extractor, polish breech face, feed ramp, and disconnector rail. Includes parts) | $200 |
| Mill slide for dovetail sight | $75 |
| Rear Novak Cut | $100 |
| Serrate rear of slide (less extractor, refinishing additional) | $100 |
| Mill slide cocking serrations front OR rear (refinishing additional) | $100 |
| Mill slide cocking serrations front & rear (refinishing additional) | $150 |
| Custom slide cuts | Quote |
Rifle
| Check Headspace | $45 |
| Make chamber cast | $90 |
| Cut & crown average barrel (sight work additional) | $90 |
| Recrown Only | $70 |
| Inlet bolt handle to stock & receiver | $45 |
| Drill & Tap (per hole) | $25 |
Glass Bed Finished Rifle | $150 |
| Install aluminum pillars | $100 |
| Inlet stock | Hourly |
| Dovetail for open sights (per cut) | $70 |
| Thread barrel | $150 |
| Laser engrave caliber in barrel | $40 |
| Swing Swivel Install (Parts NOT included) | $40 |
| Thread Protector Option(s) | Quote |
| Marlin 336 Action Polish | Quote |
| Marlin 336 Trigger Job | Quote |
| Maintenance Rebuild (includes all new springs, gas rings, complete disassemble, clean, safety check, oil, and reassemble) | $180 |
| Completely assemble a lower from parts kit | $50 |
| Install aftermarket parts | Hourly |
| Thread barrel | $150 |
| Install accessory handrail, forend, or free float tubes, many variations | $45 |
| Muzzle Brake Install (Subject to condition of existing brake) | $35 |
| Pin & Weld | $80 |
(We have a great relationship with Bartlein & Krieger, and are able to go direct with them for custom barrels)
| Custom Barrel Installation (Includes: threading, chambering, headspacing, laser engrave the caliber to the barrel. Barrel additional) | $250 |
| Barrel Threading | $150 |
| Blue Print Remington 700 | $350 |
| Up charge for Win.70 pre 64', Springfield's & Enfield's (extractor cut) | $90 |
| Barrel Fluting | Quote |
| Inlet stock for new barrel | Hourly |
| Laser engrave caliber in barrel (Not applicable for custom builds) | $35 |
| Fitting an M1 Garand barrel (Includes: Headspace, Polish chamber, Retighten gas block & front sight. Criterion Barrel additional) | $150 |
| Fitting the M1A/M14 barrel (Includes: fitting barrel to action, lapping lugs, headspace and polishing the chamber, gas cylinger and flash suppressor. Barrel additional) | $150 |
Most customers prefer contour matching and finishing of some kind. Price usually falls around $285-$325 when typical options are added.
| The MJ Brake | $100 |
| Additional: Thread Barrel for Brake | $150 |
| Additional: Match contour of barrel | $25 |
| Additional: Taper match to barrel | $25 |
| Additional: Bead blast brake after machining | $15 |
| Additional: Cerakote brake | $25 |
Shotgun
| Cut, crown, & reset bead (New bead addtional) | $95 |
| Cut & crown only on single barrels | $65 |
| Cut & crown O/U & SxS | $145 |
| Drill & Tap for sight bead (one) | $35 |
| Drill & Tap for scope mounts (per hole) | $25 |
| Open choke to your specs (all gauges) price/barrel | $120 |
| Lengthen chamber to 3" | $120 |
| Lengthen forcing cone | $120 |
| Resolder shotgun ribs (Please see the gunsmith for quote) | Quote |
| Remove dents and straighten barrels at customer risk (Please bring in for quote) | Quote |
| Trigger job on Remington 870, 1120, or 1187 using Timney sear kit | $200 |
| We can thread your barrel to accept popular choke systems | Quote |
| Pattern Shotgun | $30 + Ammo |
| Remove Stuck Choke Tube | $50 |
Stock Alterations
| Adjustable Comb Installed (includes parts & labor) | $325 |
| Soft-top adjustable comb installed (includes parts, labor & choice of color) | $425 |
| Standard Graco Adjustable Buttplate (Offers 3-way adjustment for perfect gun fit, higher scores, and improved shooting comfort. Length drop, and rotation are easily set to any position. Price includes: labor, Graco hardware, and new Kick Eez pad. | $250 |
| Length of Pull Graco Adjustable Buttplate (Adds adjustable Length of Pull) | $280 |
| Length of Pull Gracoil Buttplate (The GraCoil is a compression buttplate with a pad adjusting plate for side, up and down, and pivotal adjustment. It easily adjusts for light to heavy loads and reduces recoil to a minimum. The length of pull does not change when adjusting tension, and maximum stroke length is 5/16" which produces a response time hardly detected, for no distractions between shots. Moving parts slide on Teflon liners for trouble-free motion. All aluminum and stainless steel construction. Price includes: labor, Graco hardware, and Kick Eez pad.) | $500 |
| Buttplate install (Includes: installation & buttplate) | $90 |
| Recoil Pad Install (Includes: installation & recoil pad) | $90 |
| Stock Cutting & Squaring Up | $30 |
Bluing
Your firearm is completely disassembled, cleaned, bead blasted, blued, reassembled, lubricated, and test fired (Polishing or removal of pitting is not included).
| Most Long Guns | Quote |
| Browning Auto-5, Win Model 12, or Similar | Quote |
| Handguns | Quote |
| Octagon Barrel Only | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs (Barrel Only) | Quote |
Your firearm is completely disassembled, cleaned, polished to 450, blued, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns | Quote |
| Browning Auto-5, Win Model 12, or Similar | Quote |
| Long Gun w/ Octagon Barrel | Quote |
| Handguns | Quote |
| Octagon Barrel Only | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
Your firearm is completely disassembled, cleaned, polished to 450, bead blasted, blued, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns | Quote |
| Browning Auto-5, Win Model 12, or Similar | Quote |
| Long Gun w/ Octagon Barrel | Quote |
| Handguns | Quote |
| Octagon Barrel Only | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs (Barrel Only) | Quote |
Your firearm is completely disassembled, cleaned, polished to a high-gloss Weatherby-style finish, blued, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns | Quote |
| Browning Auto-5, Win Model 12, or Similar | Quote |
| Long Gun w/ Octagon Barrel | Quote |
| Handguns | Quote |
| Octagon Barrel Only | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs (Barrel Only) | Quote |
Your firearm is completely disassembled, cleaned, polished, rust blued, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns | Quote |
| Browning Auto-5, Win Model 12, or Similar | Quote |
| Long Gun w/ Octagon Barrel | Quote |
| Handguns | Quote |
| Octagon Barrel Only | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs (Barrel Only) | Quote |
| *Note: Firearms with excessive pitting will require additional polishing | $90/Hour |
| *Note: Firearms that are excessively dirty or rusty must be cleaned. An up-charge will be added depending on condition. Not all firearms can be restored to the original finish. |
Parkerizing
Your firearm is completely disassembled, cleaned, bead blasted, parkerized, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns & Handguns | Quote |
| M1 Garand, SKS, AK-47, FN-FAL style rifles | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
Your firearm is completely disassembled, cleaned, polished to 450, bead blasted, parkerized, reassembled, lubricated, and test fired. (These prices include the removal of minor pitting. Note: deep pitting cannot always be removed. Depending on condition, not all firearms can be restored to original condition).
| Most Long Guns & Handguns | Quote |
| M1 Garand, SKS, AK-47, FN-FAL style rifles | Quote |
| Shotgun Barrel Only | Quote |
| Over/Unders and Side-by-Sides w/ Silver Soldered Ribs | Quote |
| *Note: Firearms with excessive pitting will require additional polishing | $90/Hour |
| *Note: Firearms that are excessively dirty or rusty must be cleaned. An up-charge will be added. Depending on condition, not all firearms can be restored to the original finish. |
Cerakote
| Complete Solid (Does not include stock) | $325 |
| Complete Battleworn - Two Colors (Does not include stock) | $375 |
| Complete Pattern - Up to 3 Colors (Does not include stock) | $425 |
| Complete Custom (Does not include stock) | Starting at $450 |
| Upper, Lower, Fore-end/Rail Solid | $200 |
| Upper, Lower, Fore-end/Rail Battleworn - Two Colors | $250 |
| Upper, Lower, Fore-end/Rail Pattern - Up to 3 Colors | $325 |
| Upper, Lower, Fore-end/Rail Custom | Starting at $340 |
| Upper, Lower OR Handguard | Starting at $75 |
| AR Adjustable Stocks - Simple | $75 |
| AR Adjustable Stocks - Complex | $100 |
| Complete Solid | $325 |
| Complete Battleworn - Two Colors | $375 |
| Complete Pattern - Up to 3 Colors | $425 |
| Complete Custom | Starting at $475 |
| Barreled Action Solid | $200 |
| Barreled Action Battleworn - Two Colors | $275 |
| Barreled Action Pattern - Up to 3 Colors | $325 |
| Barreled Action Custom | Starting at $350 |
| Complete Solid | $150 |
| Complete Battleworn - Two Colors | $210 |
| Complete Pattern - Up to 3 Colors | $250 |
| Complete Custom | Starting at $300 |
| Slide Only Solid | $85 |
| Slide Only Battleworn - Two Colors | $125 |
| Slide Only Pattern - Up to 3 Colors | $175 |
| Slide Only Custom | $200 |
| Frame Only Solid | $85 |
| Frame Only Battleworn - Two Colors | $135 |
| Frame Only Pattern - Up to 3 Colors | $185 |
| Frame Only Custom | $210 |
| Slide OR Frame ONLY GunCandy (Disclaimer: No stenciling for GunCandy. Ruins the finish) | $150 |
| Slide & Frame GunCandy (Disclaimer: No stenciling for GunCandy. Ruins the finish) | $300 |
| Solid | $250 |
| Battleworn - Two Colors | $300 |
| Pattern - Up to 3 Colors | $350 |
| Custom | $400 |
| Solid | $200 |
| Battleworn - Two Colors | $250 |
| Pattern - Up to 3 Colors | $300 |
| Custom | Starting at $350 |
| Barrel flute different color | Quote |
| Solid | $200 |
| Battleworn - Two Colors | $250 |
| Pattern - Up to 3 Colors | $300 |
| Custom | Starting at $350 |
| Solid | Starting at $150 |
| Battleworn - Two Colors | Starting at $200 |
| Pattern - Up to 3 Colors | Starting at $250 |
| Custom | Starting at $300 |
| Solid | $275 |
| Battleworn - Two Colors | $325 |
| Pattern - Up to 3 Colors | $375 |
| Custom | $400 |
| Solid | $125 |
| Battleworn - Two Colors | $175 |
| Pattern - Up to 3 Colors | $225 |
| Custom | $275 |
| Solid | $50 |
| Battleworn - Two Colors | $70 |
| Pattern - Up to 3 Colors | $90 |
| Custom | $110 |
| Rings | Starting at $50 |
| Sun Shade | $25 |
| Accessory Rails | $7/Inch |
| Special Order Colors | $40 |
| Barrels (One Color - High Temp) | Starting at $95 |
| Muzzle Device (One Color - High Temp) | Starting at $35 |
| Rail or Handguard Only | Starting at $75 |
| Rail or Handguard (Second color for accents) | Starting at $40 |
| MSR (AR/AK) Magazine (One Color) | $40 |
| MSR Grip or Forward Grip | $50 |
| MSR Stock | $75 |
| Handgun Base Plate (One Color) | $20 |
| Bipod (One Color) | $100 |